5 ingenious ideas for making large decorative vases

There is nothing that, with a little creativity and skillful hands, cannot be turned into a work of art, such is the case with large decorative vases.

There are thousands of models of large decorative vases for sale, however, if you want to save a little money, you have come to the right place, because here I show you the most practical ideas to generate them.

How to make decorative vases?

Believe it or not, there are several ways to generate them, without knowing about crafts with glass, ceramics or clay. There are materials at your fingertips and cheap that can lead you to produce large vases to set your home.

And because you were looking for it, I show you the 5 easiest ideas of how to make decorative vases.

1. Large decorative cardboard vases

Among the most adaptable materials for crafts, cardboard is the one that leads the list. You can easily make large decorative vases just by generating 2 patterns of the model you want, joining them to produce a wide 3D vase.

However, to give a more realistic effect, the easiest way is to make vases out of cardboard sheets. positioned vertically. To make it you will need:

• Large sheets of cardboard.

• White glue.

• Cardboard cylinder.

• Pencil.

• Recycled paper or newsprint.

• Paint.

To do this, first choose the model of vase you want, if it has slight curves, do not worry about the cardboard you will generate.

Then, take the sheets and the cylinder and mark the height measurement you require. On the cardboard, you will mark the pattern of the figure of the vase, and you will repeat it as many times as necessary. You are cutting them, you will position them in fin mode to the cylinder, thus generating the 4D figure.

The more the better, since after this step, you must proceed to cover it with paper and glue. Take long strips so that it has a uniform finish, and let dry, repeat the process until you get firmness.

Finally, paint it, either with acrylic or spray materials, and you can generate unique designs with different colors and finishes.

2. Large Decorative Paper Vases

This is a spherical vase model, with a slightly elongated opening, which, although it has a metallic finish, can also be made with paper and glue.

The idea, very similar to that of the previous model, is to generate a kind of plaster, but with cheap and practical materials. To do it you will need:

• 1 large balloon.

• Paperboard.

• Scotch tape.

• Recycled or newspaper paper.

• Glue.

• Metallic paint spray.

• Water.

To begin, you must inflate the balloon, if we are talking about large decorative vases, then you must fill it with air as much as possible to the extent that you think is appropriate.

Then, on the balloon, to create the opening, cut a strip of cardboard, this should have a width that corresponds to the height of the opening you want. The cardboard, roll it up so that it easily takes the shape you want.

After that, generate a kind of cylinder on the balloon, which you will fix with the adhesive tape.

The next step is to produce the paste, which will work to strengthen the paper. To do this, take glue and add water to it, until it has a more liquid texture.

Now yes, to start adhering the strips of paper. Cover everything and generate layers upon layers, letting dry and repeating the process.

You will know that it is ready when it feels firm and hard, with this proceed to deflate the balloon or burst it with a puncture, and cover it completely with metallic spray.

3. Wooden boards for decorative vases

Even if you don't know much about woodworking, this is one of the simplest ways to generate large decorative vases. This is due to the few materials you will need:

• Wide boards or thin sheets of wood.

• Glue.

• Little nails.

• Color varnish or paint.

To start you must have the exact measurements of the 4 faces of the vase and the bottom.

To do this, you can choose a simple model like this one, which has exact rectangles and a square bottom proportional to that of the opening.

The idea with this is to cut the wood generating these patterns, making clean cuts, and then fix them with glue, sealing them with nails at the joints.

Finished this, proceed to paint it, the best option is to use varnish with a woody color, but you can paint it another color and cover it with a thin layer of natural varnish.

4. Cement to generate large decorative vases

Cement is one of the products with which most vases are made, both by industries and at home.

This is due to its ease of production and because it is one of the most resistant materials for this type of decoration.

Now, how to make decorative vases with cement? To do this, start by finding 2 molds for your vase.

The main one can be a cylindrical plastic container or another object with the measurements you want and that you can later cut it.

For its part, the second mold is located inside, so it must be much smaller or narrower than the first. The idea is that there is space between the two, enough so that it is thick and resistant.

Also, make sure that the surface of the mold inside is smooth so that it is easier to remove it.

The next step is to process the cement, for this you will only need to mix the following ingredients:

• 1 measure of gray cement.

• 2 equal measures of construction sand.

• Water.

Now, with this mixed, reserve it, and spread mineral oil in the molds, then fill the first mold with cement, generating the base, hit it on the sides so that the mixture goes down, then insert the other mold, exert pressure without reaching to the last, and add weight inside.

After this, pour the rest of the mixture on the sides and hit the sides, culminating this, let it dry for 5 days, in a flat place.

Finish your work by cutting the molds, leave it submerged in water for 1 day and then let it dry. After that, he proceeds to sand it.

5. Large decorative vases made of natural fiber yarns

If you're handy with weaving, you can make these lovely large decorative vases. However, if not, don't worry, there is an easier way.

It takes the same method of the balloon and the cardboard strip that we implemented in the decorative paper vases. But instead of using this material, he implements natural fiber threads.

Proceed to wind the thread from the base of the balloon, while you cover it with white glue, wind it in a spiral without leaving gaps and when you reach the end, go back down and repeat the operation.

Let dry well and finish by deflating the balloon, and enjoying your new large decorative vase.